MikroTik Changelog FULL

[NetworkPro]

Backup на changelog-а на MikroTik версии 2.x

понеже техния на адрес: http://www.mikrotik.com/download/CHANGELOG_full - липсва

Полезен, за да знаете защо може да ви потрябва нова версия, ако се дъни на вашата конфигурация, дали е било бъг, и т.н.

Changelog за версии 3.x има на адрес:

http://www.mikrotik.com/download/CHANGELOG_rc

http://www.mikrotik.com/download/CHANGELOG_3

http://www.mikrotik.com/download/CHANGELOG_4

http://www.mikrotik.com/download/CHANGELOG_5

MikroTik_CHANGELOG_full_2.9_Beta_1_to_2.9.51.txt

[NetworkPro]

What's new in 4.0beta1:

*) added support for MetaROUTERs;

*) all test packages are regular ones;

*) console - can mix named and unnamed arguments, can use names for unnamed

    argument values. For example all of the following commands are

    accepted now:

      /ping 10.11.12.13 count=4

      /ping address=10.11.12.13 count=4

      /ping count=4 10.11.12.13

What's new in 3.17:

*) added support for Intel 10Gb PCI Express driver;

*) made Huawei E220 USB modem work again;

*) added support for Novatel Wireless Ovation MC950D HSUPA;

*) fixed PCQ fairness when pcq-total-limit is reached;

*) fixed fetch tool to work when dst-path is not specified (broken in 3.16);

*) fetch tool - added keep-result command line argument;

*) allow to specify routing-table for ping, trace-route, and telnet;

*) fixed an IPsec bug;

*) fixed /ip firewall address-list;

*) added propagate-ttl option for MPLS;

*) fix very long wireless scan-list issues;

*) fixed problem - sometimes PCQ could stop data pass-through if pcq-rate was set;

*) fixed problem - L2TP could stop working when one of clients stopped responding

  at wrong time;

*) fixed problem - reduced size of supout.rif files;

*) graphing - support for 10 Gbit interfaces;

*) routing-test - added support for multi-instance OSPF;

*) user manager - fixed bug for PayPal payments with long parameter list;

*) user manager - database load command supports external storage

   for temporary files;

*) user manager - added support for all UTC time-zone offsets,

   including +5:30, +5:45, etc.;

*) added propagate-ttl option for MPLS;

*) fixed /ip firewall address-list

*) fixed an IPsec bug;

Known issues:

*) on some SMP x86 boxes clocks are not right, time runs very fast on them, as a result

  queues & wireless-test nstreme does not work;

http://www.mikrotik.com/download.html

[Тодор Лазаров]

а как да се разбира това:

*) added support for MetaROUTERs;

е доживяхме и версия 4.x .....

[NetworkPro]

MetaROUTERs? Google-а връща два интересни сайта, но аз разчитам на обяснението на латвийците в тяхното WiKi.

[Тодор Лазаров]

MetaROUTERs? Google-а връща два интересни сайта, но аз разчитам на обяснението на латвийците в тяхното WiKi.

Според мен е някаква виртуализация.

т.е. Работа на 2 или повече тика в един.

щото другото ново /пинг/ не ми е интересно.

[NetworkPro]

[smiley=beer.gif]

What's new in 3.18:

*) IPv6 address auto-configuration: added recursive DNS server option;

*) fixed problem - sometimes firewall did not work after reboot on RB1xx;

*) do not send IPv6 packets over PPTP, L2TP or PPPoE - could confuse some

  servers or clients;

*) allow queues to have all traffic, not only ip (for example vpn);

*) added ability to specify dns name in bandwidth test in WinBox;

*) fixed problem - sometimes RB1xx (and RB4xx) could not start up or startup was very long;

*) improved ipv6 sniffing;

*) improve torch and sniffer behavior under high load;

*) improved queue statistics;

*) fix xen make-routeros-image command;

*) fix potential wireless crash under load when negotiating encryption;

*) fix several MPLS issues in mpls-test;

*) fixed support for Novatel Wireless Ovation MC950D HSUPA;

*) fixed some bugs in routing-test OSPF;

*) added support for D-Link DUB-E100 USB Ethernet adapter;

*) fixed user-manager database rebuild command to succeed in case of

  malformed database disk image;

*) sms - added descriptions for error codes;

*) sms - added automatic 'smsc' (service centre address) value detection,

    to work around first time error when sending SMS without specifying

    an 'smsc' value;

*) fixed - during uptime 4:20 .. 5:00 interface traffic (byte and packet

  count) was being reported 100 times larger than the actual value;

*) provide L2TP server address in Called-Station-Id when doing authentication over RADIUS;

*) added support for Sierra Wireless MC8790;

*) recalibrated noise floor adjustment for R5H;

*) updated drivers & kernel - fixed fast clock issue on x86;

[NetworkPro]

А ето го и changelog-а на BIOSа на рутербордовете : http://www.routerboard.com/files/rb-2.18/CHANGELOG

What's new in 2.18:

*) fixed via-rhine disappearing on RB532 and RB564;

*) added support for RB493AH;

What's new in 2.17:

*) added support for MLC NAND chip;

What's new in 2.16:

*) fixed bug - boot from NAND on RB532A could fail (bug introduced in 2.13);

*) fixed bug - etherboot on RB433/RB450 at 10Mbit did not work;

What's new in 2.15:

*) fixed RB333 overheating problem;

*) added support for microSD card on RB433;

What's new in 2.14:

*) fixed nand boot on RB150 (broken in v2.13);

What's new in 2.13:

*) improved memtest;

*) fixed RB600 memory issue;

What's new in 2.12:

*) nand improvement for RB532A;

What's new in 2.11:

*) fixed bug - in one rare case boot from NAND could fail

  with "data is corrupted" message while data is correctable in reality;

What's new in 2.10:

*) 100ms delay before PCI bus are initialized;

What's new in 2.9:

*) added support for RB192;

What's new in 2.8:

*) fixed CompactFlash resetting router config on RB153 (broken in v2.7);

What's new in 2.7:

*) fixed bug -      RouterOS command "/system reset-configuration"

           was not resetting RB532 VIA ethernet mac address to default;

*) added support for RB532r5;

What's new in 2.6:

*) fixed CompactFlash reseting router config on RB153;

What's new in 2.4:

*) fixed etherboot on RB100 to work reliably;

What's new in 2.2:

*) fixed repeated initrd image loading;

What's new in 2.1:

*) fixed crash during memory test within RouterBOOT;

What's new in 2.0:

*) added support for RB153;

What's new in 1.13:

*) fixed nand format feature to mark back really bad blocks as bad;

What's new in 1.12:

*) reset-jumper resets bios settings to defaults;

What's new in 1.11:

*) fixed reboot failure on RB500 with new RAM modules;

What's new in 1.10:

*) added workaround for reboot failure on RB500 with new RAM modules;

What's new in 1.9:

*) new boot option - "boot NAND, if fail then Ethernet";

What's new in 1.8:

*) fixed bug - it was possible for RB500 booter to stop working completely;

What's new in 1.7:

*) added nand format feature;

What's new in 1.3:

*) added support for large block NAND devices;

What's new in 1.2:

*) fixed bios entering on <delete> key for hyperterminal;

*) routerboard 100 beep before jumping to kernel code;

*) added nand READY/BUSY checking for rb100;

*) improved speed for memory test;

[NetworkPro]

What's new in 3.19:

*) fixed problem - web proxy used up all router memory

  if unlimited ram caching was enabled;

*) fixed problem - some log topics got swapped in configuration;

*) reduced maximum supported memory for RB1000 to 1.5Gb (was 1.75Gb);

*) interface mesh was not working in 3.18, fixed;

*) fixed Prism crash;

*) fixed VPLS interface related crash in mpls-test;

*) allow to enter range in BGP instance confederation peers;

*) console - fixed '/system backup save' command, name argument is

   optional, and backup file name is automatically generated if empty;

*) sped up IPv6 forwarding on RB4xx, RB1xx and RB5xx;

*) fixed BGP route selection in routing-test;

*) fixed dhcp server to update agent-circuit-id and agent-remote-id for lease

  whenever it changes;

[NetworkPro]

What's new in 3.20:

*) added support for IPsec hardware acceleration on RB1000,

  increases IPsec SHA1-3DES encryption from 45Mbps to 500Mbps

  and SHA1-AES from 79Mbps to 500Mbps;

*) fixed IPv6 on RB1xx and RB5xx;

*) added support for ZTE MY 39, CDMA EVDO USB card;

*) added clear-df action to firewall;

*) fixed bug - sometimes netinstall could fail to install RouterBOARD

  with "ERROR: could not format partitions";

*) fixed PCQ bug - pcq-rate < 70000 did not work correctly (broken in 3.17);

*) added radius-mac-format setting in hotspot server profile;

*) allow to use ip firewall for encapsulated PPPoE packets;

*) graphing - fixed 10Gbit card bug;

[NetworkPro]

What's new in 3.22:

*) added advanced switch features for RB450G;

*) added support for MetaROUTER on RB450G;

*) added support for adding physical interfaces to Metarouters;

*) added set-bgp-prepend-path action to routing filters;

*) added WinBox OSPFv3 support to routing-test package;

*) added WinBox IPv6 routes support to routing-test package;

*) console - added 'hide-sensitive' option to the export command;

*) user manager - fixed customer remove interface bug;

*) fixed Cisco BGP VPLS autodiscovery in mpls-test package;

*) fixed LDP to not disconnect on unknown capabilities of remote

  peer (should help establish LDP session with Junos);

*) fixed ethernet port name reordering on RB493;

*) bonding mode balance-alb now works on RB1xx, RB4xx, RB616, RB600, RB750,

  RB1000;

*) added '/interface ethernet print stats' command for RB450G and RB750;

*) fixed CSPF in routing-test to properly interpret link bandwidth;

*) added support for C-motech CNU-680 CDMA 1x EV-DO 450Mhz USB Modem;

What's new in 3.21:

*) backported MetaROUTER support for RB4xx from v4;

*) added WinBox MPLS & VPLS support mpls-test package;

*) added WinBox BGP support to routing-test package;

*) api - added query support for 'print' command;

*) added support for bsd-syslog;

*) added TFTP server;

*) added authorization and TLS support to email tool;

*) added pppoe-scanner;

*) added tftp protocol support to fetch tool;

*) fixed ipsec policy priority to work as documented;

*) fixed BGP route selection in routing package;

*) allow to use IPsec aggressive mode with pre-shared keys;

*) fixed some problems in mesh protocol;

*) fixed https proxying with parent proxy;

*) fixed Prism shared IRQ issue;

*) fixed multiple MPLS/VPLS bugs in mpls-test;

*) fixed boot problems on some RB1000s;

*) added /interface mesh traceroute command;

*) fixed web proxy source address selection;

*) fixed pcq queue - pcq sometimes could get through more traffic

  than specified in max-limit;

MikroTik RouterOS version 3.22 released!

Changelog:

http://www.mikrotik.com/download/CHANGELOG_3

Torrent files:

http://www.mikrotik.com/download/routeros-ALL-3.22.torrent

Regular HTTP download:

http://www.mikrotik.com/download.html

[Тодор Лазаров]

За мен сега е интерсна

/interface pppoe-scanner interface=...

така ще следя кой ще пуска pppoe-server

Да внимават хакерите

[111111]

За мен сега е интерсна

/interface pppoe-scanner interface=...

така ще следя кой ще пуска pppoe-server

Да внимават хакерите

по скоро VPN да пусне РРРоЕ е с малък ТТL и не се рутира

[Тодор Лазаров]

Не те разбраш.

pppoe не е ли в сигмент, т.е. той звани за сервизното има и тогава си получава адресите.

това е инструмент да провериш дали някой е пуснал pppoe-server

[111111]

Не те разбраш.

pppoe не е ли в сигмент, т.е. той звани за сервизното има и тогава си получава адресите.

това е инструмент да провериш дали някой е пуснал pppoe-server

чак пък рррoe в лана на доставчика да пусне това е грубо

има още куп скенери за такива неща

инак рррое не се рутира

[NetworkPro]

Грубо но работи, същия AC name, друг MAC адрес. С паролите не знам как ще стане....

[NetworkPro]

За мен сега е интерсна

/interface pppoe-scanner interface=...

така ще следя кой ще пуска pppoe-server

Да внимават хакерите

Навремето правих такъв feature request. Само че, тази глупост само чака за случайни пакети. Ще направя request за PPPoE Discovery capability. (Да изпраща пакети със запитване за да получи веднага отговори от всички AC)