Излязла е нова версия на RouterOS v6.48.2

[News]

6.48.2 changelog:

*) bonding - improved system stability when disabling/enabling bonding ports;
*) bridge - improved bridge stability when host changes port (introduced in v6.47);
*) console - require "write+ftp" permissions for exporting configuration to file;
*) console - updated copyright notice;
*) crs3xx - added "/system swos" menu for CRS354 devices, should only be used after SwOS 2.13 release;
*) crs3xx - fixed interface LEDs for QSFP+ and SFP+ interfaces on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed packet transmit in 5Gbps link rate for CRS312 device;
*) crs3xx - improved 1Gbps Ethernet port group traffic forwarding for CRS354 devices;
*) dhcp - fixed link state checking for DHCP client;
*) ethernet - fixed cable-test for some devices (e.g. RB2011, RB951G-2HnD);
*) ethernet - improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices;
*) fastpath - fixed IP packet receive on bridge and bonding interfaces when destination MAC address match with slave port MAC;
*) health - fixed voltage monitor on BaseBox5 devices;
*) ike2 - added "MS-CHAP-Domain" attribute to RADIUS requests;
*) ike2 - fixed DH group negotiation with EAP;
*) ike2 - fixed EAP MSK length validation (introduced in v6.48);
*) ike2 - fixed initial traffic selector's protocol and port in transport mode;
*) ipv6 - improved system stability when parsing IPv6 options;
*) lora - added additional predefined network servers;
*) lora - added option to hide CRC error messages in monitor;
*) lora - improved downlink transmission;
*) ospf - fixed type-7 LSA translation to type-5;
*) ovpn - fixed route cache entry leak when establishing a new session;
*) poe - do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out;
*) ppp - do not fail "at-chat" command when issued on disabled PPP interface;
*) ptp - improved management service stability when receiving bogus packets;
*) quickset - prefer 5GHz interface for WiFi scan in CPE mode;
*) rb3011 - improved system stability when changing RouterBOARD settings (introduced in v6.48);
*) snmp - fixed SNMP trap agent address;
*) supout - fixed "topic" column presence in "Log" section;
*) switch - improved resource allocation on 98PX1012 switch chip for CCR2004-1G-12S+2XS device;
*) switch - improved system stability with 98PX1012 switch chip for CCR2004-1G-12S+2XS device;
*) telnet - do not send options if connecting to non standard port;
*) telnet - fixed server when run on non standard port;
*) tr069-client - improved management service stability when receiving bogus packets;
*) upgrade - fixed upgrade procedure on 16MB devices;
*) upgrade - improved "long-term" upgrade procedure on SMIPS devices;
*) user - fixed "skin" configuration for user groups (introduced in v6.48);
*) webfig - allow to specify "prefix" parameter under "IPv6/ND/Prefixes" menu;
*) webfig - do not corrupt settings when starting "Wireless Sniffer";
*) webfig - do not move top right menu in opposite direction when scrolling horizontally;
*) webfig - do not show newly created SMB shares as invalid;
*) webfig - fixed new interface addition;
*) webfig - show "Interfaces" menu by default after logging in;
*) webfig - show "network-mode" for LTE modems that support it;
*) winbox - added "Channel" parameter under "System/Console" menu;
*) winbox - do not show empty "CPU Frequency" parameter under "System/Resources" menu;
*) winbox - fixed "reachable-time" value unit under "IPv6/ND" menu;
*) winbox - fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
*) winbox - fixed duplicate "Trusted" setting under "Interface/Bridge/Ports" menu;
*) winbox - hide "Allow Roaming" parameter on LTE modems that do not support it;
*) winbox - increased "target" field limit to 128 under "Queues" menu;
*) winbox - renamed IP protocol 41 to "ipv6-encap";
*) winbox - show "LCD" only on boards that have LCD;
*) winbox - show "System/Health" only on boards that have health monitoring;
*) winbox - show "activity" column by default under "IP/Kid Control/Devices" menu;

Свали от тук