6.40.1 changelog: *) bonding - improved reliability on bonding interface removal;
*) chr - fixed false warnings on upgrade reboots;
*) dhcpv6-client - do not run DHCPv6 client when IPv6 package is disabled;
*) export - fixed export for different parameters where numerical range or constant string is expected;
*) firewall - properly remove "address-list" entry after timeout ends;
*) interface - improved interface state change handling when multiple interfaces are affected at the same time;
6.40.1 changelog: *) bonding - improved reliability on bonding interface removal;
*) chr - fixed false warnings on upgrade reboots;
*) dhcpv6-client - do not run DHCPv6 client when IPv6 package is disabled;
*) export - fixed export for different parameters where numerical range or constant string is expected;
*) firewall - properly remove "address-list" entry after timeout ends;
*) interface - improved interface state change handling when multiple interfaces are affected at the same time;
6.41rc7 changelog: *) export - fixed export for different parameters where numerical range or constant string is expected;
*) ovpn-client - fixed incorrect netmask usage for pushed routes;
*) pppoe-client - fixed incorrectly formed PADT packet;
*) winbox - added "none-dynamic" and "none-static" options for "address-list-timeout" parameter under NAT, Mangle and RAW rules;
*) winbox - do not show duplicate filter parameters "Published" in ARP list;
*) winbox - show warnings under "/system rou
6.41rc7 changelog: *) export - fixed export for different parameters where numerical range or constant string is expected;
*) ovpn-client - fixed incorrect netmask usage for pushed routes;
*) pppoe-client - fixed incorrectly formed PADT packet;
*) winbox - added "none-dynamic" and "none-static" options for "address-list-timeout" parameter under NAT, Mangle and RAW rules;
*) winbox - do not show duplicate filter parameters "Published" in ARP list;
*) winbox - show warnings under "/system rou
6.41rc6 changelog: *) btest - improved reliability on Bandwidth Test when device`s RAM is almost full;
*) dhcpv6-client - do not run DHCPv6 client when IPv6 package is disabled;
*) ipv6 - fixed IPv6 address request from pool (introduced in 6.41rc1);
*) lte - added support for Novatel (Verizon) USB730L;
*) lte - fixed LTE not passing any traffic while in running state;
*) ppp - added support for Sierra MC7750;
*) torch - fixed Torch on PPP tunnels (introduced in 6.40);
Other changes since
6.41rc6 changelog: *) btest - improved reliability on Bandwidth Test when device`s RAM is almost full;
*) dhcpv6-client - do not run DHCPv6 client when IPv6 package is disabled;
*) ipv6 - fixed IPv6 address request from pool (introduced in 6.41rc1);
*) lte - added support for Novatel (Verizon) USB730L;
*) lte - fixed LTE not passing any traffic while in running state;
*) ppp - added support for Sierra MC7750;
*) torch - fixed Torch on PPP tunnels (introduced in 6.40);
Other changes since
6.41rc4 changelog: *) bridge - show "admin-mac" only if "auto-mac=no";
*) rb922 - restored missing wireless interface on some boards;
Other changes since 6.40:
*) CRS3xx - switch VLAN configuration integrated within bridge VLAN configuration with hw-offload;
*) arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
*) bonding - improved relialibility on bonding interface removal;
*) bridge - fixed ARP setting (introduced in v6.40rc36);
*) bridge - fixed m
6.41rc4 changelog: *) bridge - show "admin-mac" only if "auto-mac=no";
*) rb922 - restored missing wireless interface on some boards;
Other changes since 6.40:
*) CRS3xx - switch VLAN configuration integrated within bridge VLAN configuration with hw-offload;
*) arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
*) bonding - improved relialibility on bonding interface removal;
*) bridge - fixed ARP setting (introduced in v6.40rc36);
*) bridge - fixed m
6.40 changelog: *) bonding - fixed 802.3ad mode on RB1100AHx4;
*) btest - fixed crash when packet size has been changed during test;
*) capsman - added "current-registered-clients" and "current-authorized-clients" count for CAP interfaces;
*) capsman - fixed EAP identity reporting in "registration-table";
*) capsman - set minimal "caps-man-names" and "caps-man-certificate-common-names" length to 1 char;
*) certificate - added "crl-use" setting to disable CRL use (CLI only);
*) certificate
6.40 changelog: *) bonding - fixed 802.3ad mode on RB1100AHx4;
*) btest - fixed crash when packet size has been changed during test;
*) capsman - added "current-registered-clients" and "current-authorized-clients" count for CAP interfaces;
*) capsman - fixed EAP identity reporting in "registration-table";
*) capsman - set minimal "caps-man-names" and "caps-man-certificate-common-names" length to 1 char;
*) certificate - added "crl-use" setting to disable CRL use (CLI only);
*) certificate
6.40rc41 changelog: *) bonding - fixed 802.3ad mode on RB1100AHx4;
*) export - fixed export to a file (introduced in v6.40rc39);
*) hotspot - added "address-list" support in "walled-garden" IP section;
*) hotspot - fixed firewall accept rules created by "/ip hotspot walled garden ip" (introduced in v6.40rc18);
*) ike1 - create tunnel policy when no split net provided;
*) ike1 - wait for cfg set reply before ph2 creation with xAuth;
*) ipsec - allow to specify chain in "firewall" peer optio
6.40rc41 changelog: *) bonding - fixed 802.3ad mode on RB1100AHx4;
*) export - fixed export to a file (introduced in v6.40rc39);
*) hotspot - added "address-list" support in "walled-garden" IP section;
*) hotspot - fixed firewall accept rules created by "/ip hotspot walled garden ip" (introduced in v6.40rc18);
*) ike1 - create tunnel policy when no split net provided;
*) ike1 - wait for cfg set reply before ph2 creation with xAuth;
*) ipsec - allow to specify chain in "firewall" peer optio
6.40rc38 changelog: *) certificate - update and reload old certificate with new one if SKID matches;
*) email - added support for multiple attachments;
*) firewall - added "none-dynamic" and "none-static" options for "address-list-timeout" parameter;
*) firewall - fixed crash on fasttrack dummy rule manual change attempt;
*) ikev2 - fixed duplicate policy checking with "0.0.0.0/0" policies;
*) lte - added initial fastpath support (except SXT LTE and Sierra modems);
*) mmips - added support
6.40rc38 changelog: *) certificate - update and reload old certificate with new one if SKID matches;
*) email - added support for multiple attachments;
*) firewall - added "none-dynamic" and "none-static" options for "address-list-timeout" parameter;
*) firewall - fixed crash on fasttrack dummy rule manual change attempt;
*) ikev2 - fixed duplicate policy checking with "0.0.0.0/0" policies;
*) lte - added initial fastpath support (except SXT LTE and Sierra modems);
*) mmips - added support
6.40rc36 changelog: *) filesystem - improved error correcting process on tilera and RB1100Dx4 storage;
*) firewall - fixed bridge "action=log" rules;
*) health - fixed memory leak on devices that have "/system health" menu (introduced in 6.40rc30);
*) ikev1 - added log error message if netmask was not provided by "mode-config" server;
*) ipsec - added support for "key-id" peer identification type;
*) rb3011 - fixed packet passthrough on switch2 while booting;
*) sniffer - do not skip L2 pa
6.40rc36 changelog: *) filesystem - improved error correcting process on tilera and RB1100Dx4 storage;
*) firewall - fixed bridge "action=log" rules;
*) health - fixed memory leak on devices that have "/system health" menu (introduced in 6.40rc30);
*) ikev1 - added log error message if netmask was not provided by "mode-config" server;
*) ipsec - added support for "key-id" peer identification type;
*) rb3011 - fixed packet passthrough on switch2 while booting;
*) sniffer - do not skip L2 pa
