6.41rc44 changelog: *) bridge - added comment support for VLANs;
*) bridge - added support for "/interface list" as a bridge port;
*) crs317 - added initial support for HW offloaded MPLS forwarding;
*) crs3xx - fixed 100% CPU usage after interface related changes (introduced in v6.41rc31);
*) dhcpv4-client - add dynamic DHCP client for mobile clients which require it;
*) fetch - accept all HTTP 2xx status codes;
*) firewall - do not NAT address to 0.0.0.0 after reboot if to-address is used
6.41rc38 changelog: *) arm - minor improvements on CPU load distribution for RB1100 series devices;
*) bgp - added 32-bit private ASN support;
*) lte - added Passthrough support (CLI only);
*) snmp - fixed "/system license" parameters for CHR;
*) upnp - add "src-address" parameter on NAT rule if it is specified on UPnP request;
*) upnp - deny UPnP request if port is already used by the router;
Other changes since 6.40.4:
!) bridge - implemented software based vlan-aware bridges;
https:
6.40.4 changelog: *) address - show warning on IPv6 address when acquire from pool has failed;
*) arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
*) crs1xx/2xx - fixed 1 Gbps forced mode for several SFP modules;
*) crs317 - added L2MTU support;
*) crs3xx - improved packet processing in slowpath;
*) defconf - fixed RouterOS default configuration (introduced in v6.40.3);
*) dhcp - fixed downgrade from RouterOS v6.41 or higher;
*) dhcpv6 client - added I
6.41rc37 changelog: *) bridge - initial support for "/interface list" as a bridge port (CLI only);
*) fetch - accept all HTTP 2xx status codes;
*) ike2 - fixed initiator DDoS cookie processing;
*) ike2 - fixed responder DDoS cookie first notify type check;
*) lte - fixed modem initialization after reboot;
*) ntp-client - properly start NTP client after reboot if manual server IP is not configured;
*) sfp - fixed OPTON module DDM information readings;
*) wireless - added "etsi1" regulatory
6.41rc34 changelog: *) crs3xx - improved packet processing in slowpath;
*) defconf - fixed RouterOS default configuration (introduced in v6.40.3);
*) ethernet - removed "master-port" parameter;
*) log - fixed "unknown" interface name in log messages;
*) lte - added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
*) lte - do not reset modem when it is not possible to access SMS storage;
*) snmp - fixed "ifHighSpeed" value of VLAN, VRRP and Bonding interfaces;
*
6.41rc32 changelog: *) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx;
*) bridge - implemented software based "igmp-snooping";
*) console - do not stop "/certificate sign" process if console times out in 1 minute;
*) lte - added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
*) traceroute - improved "/tool traceroute" results processing;
*) wireless - log "signal-strength" when successfully connected to AP;
Other changes since 6.40.
6.41rc30 changelog: *) crs317 - added L2MTU support;
*) crs326 - fixed packet processing speed on switch chip if individual port link speed differs;
*) crs3xx - added port ingress and egress rate limiting;
*) export - fixed wireless "ssid" and "supplicant-identity" compact export;
*) ppp - fixed situation when part of PPP configuration was reset to default values after reboot;
*) wireless - added "allow-signal-out-of-range" option for Access List entries (CLI only);
Other changes since 6.
6.41rc28 changelog: *) console - do not stop "/certificate sign" process if console times out in 1 minute;
*) crs317 - added L2MTU support;
*) crs3xx - added port ingress and egress rate limiting;
*) log - added "bridge" topic;
*) lte - added Passthrough support (CLI only);
Other changes since 6.40.3:
!) bridge - general development of hw-offload bridge implementation (introduced in v6.40rc36);
!) bridge - implemented software based vlan-aware bridges;
https://wiki.mikrotik.com/wiki/Ma
6.41rc23 changelog: *) address - show warning on IPv6 address when acquire from pool has failed;
*) bridge - fixed connectivity issues when there are multiple VLAN interfaces on bridge;
*) bridge - show bridge interface local addresses in the host table;
*) crs317 - added initial support for HW offloaded MPLS forwarding;
*) dhcp - fixed DHCP services failing after reboot when DHCP option was used;
*) dhcpv4-client - allow to use DUID for client ID;
*) dhcpv6-client - require pool name to b
6.40.3 changelog: *) dhcpv6-server - do not release address of static binding from pool after server removal;
*) export - fixed "/system routerboard" export (introduced in 6.40.1);
*) export - fixed export for PoE-OUT related settings;
*) ike1 - fixed initiator ID comparison to NAT-OA;
*) led - fixed "on" and "off" triggers when multiple LEDs are selected;
*) led - fixed RB711UA ether1 LED (introduced in v6.38rc16);
*) lte - do not show USB LTE modem under "/port" menu;
*) lte - fixed eth
6.41rc20 changelog: *) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx;
*) bridge - fixed "fast-forward" counters;
*) bridge - implemented software based "igmp-snooping";
*) bridge - implemented software based MSTP;
*) bridge - removed "master-port" parameter;
*) dhcpv6 client - added IAID check in reply;
*) dhcpv6-client - fixed IA check on solicit when "raoud-commit" is enabled;
*) dhcpv6-server - do not release address of static binding from pool after server
6.41rc18 changelog: *) bridge - changed "Host" and "MDB" table column order;
*) ipv6 - add dynamic "/ip dns" server address from RA when RA is permitted by configuration;
*) log - optimized "poe-out" logging topic logs;
*) lte - added Passthrough support (CLI only);
*) poe-out - fixed router reboot after "poe-out-status" changes;
*) userman - fixed "limitation" and "profile-limitation" update;
*) webfig - allow to open table entry even if table is not sorted by # (introduced in v6.40);
*)
6.40.2 changelog: *) dhcpv6-client - fixed IA evaluation order;
*) led - fixed "modem-signal" LEDs (introduced in 6.40);
*) pppoe-client - fixed wrong MRU detection over VLAN interfaces;
*) rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40);
*) sfp - fixed invalid temperature readings when ambient temperature is below 0C;
*) winbox - added certificate settings;
*) winbox - added support for certificate CRL list;
*) winbox - do not show LCD menu for devices w
6.41rc17 changelog: *) bridge - fixed "R" state for bridge interfaces on x86 and CHR installations (introduced in v6.41rc12);
*) capsman - added "vlan-mode=no-tag" option;
*) ipsec - added DH groups 19, 20 and 21 support for phase1 and phase2 (CLI only);
*) ipsec - allow to specify "remote-peer" address as DNS name;
*) lcd - fixed unresponsive LCD (introduced in v6.41rc15);
*) lte - added Passthrough support (CLI only);
*) pppoe - fixed invalid PPPoE server or client after reboot or "inter
6.41rc16 changelog: *) ipsec - added DH groups 19, 20 and 21 support for phase1 and phase2 (CLI only);
*) lcd - fixed unresponsive LCD (introduced in 6.41rc15);
*) lte - added passthrough support (CLI only);
*) traffic-flow - fixed reboots when IPv6 address has been set as target address without active IPv6 package;
Other changes since 6.40.1:
!) bridge - implemented software based vlan-aware bridges;
https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Filtering
!) switch
