Форуми

Кабела става и за външен монтаж не изгаря от слънцето.

Здравейте, Продавам следните неща: 4бр. GrooveGA-52HPacn  без захранвания - 80лв./бр. 2бр. антени пасат 60см с единичен облъчвател - 50лв./бр 2бр. антени пасат 60см с двоен облъчвател - 60лв./бр 2бр. захранвания MEAN WELL DRP-240-48  (240W 48V)  100 лв./бр.  (нови немонтирани, седяли за резерва, 1м. гаранция от мен.)  2бр. захранвания MEAN WELL DRP-480-48  (480W 48V)  180 лв./бр.  (нови немонтирани, седяли за резерва, 1м. гаранция от мен.)   2бр. CISCO 3550-24-FX - 200лв. общо (единият е с подменени портове 24 броя Single Mode, SC, 100Mbit/s по едно влакно ТХ1550, вторият си е с оригиналните си мултимод портове.)   Все още имам останали боксове  IPTV set top box Amino AmiNET110 MPEG2 ако някой има нужда. 2бр. Atom510 с по два лан порта 1GB в кутия 2U работещи на 12V   Нещата се намират в Костенец, възможна доставка до София.   За контакти на ЛС   Весели празници!!!    

Пробвах да си спра fast track и fast path защото ми бяха пуснати, за сега не виждам да помага това в случая.

Да повдигна малко темата с ново питане, конфига ми mangle е следния: /ip firewall mangle add action=accept chain=prerouting comment="mai e izlishno" disabled=yes in-interface=ether1 add action=accept chain=prerouting comment="mai e izlishno" disabled=yes in-interface=ether2 add action=mark-connection chain=prerouting comment="Connection mark for traffic initiated from WAN 1 towards ROS" connection-mark=\ no-mark connection-state=new in-interface=ether1 new-connection-mark=wan1_conn passthrough=yes add action=mark-connection chain=prerouting comment="Connection mark for traffic initiated from WAN 2 towards ROS" connection-mark=\ no-mark connection-state=new in-interface=ether2 new-connection-mark=wan2_conn passthrough=yes add action=mark-routing chain=output comment="Routing mark for traffic initiated from the router itself wan1" connection-mark=\ wan1_conn new-routing-mark=to_wan1 passthrough=no add action=mark-routing chain=output comment="Routing mark for traffic initiated from the router itself wan2" connection-mark=\ wan2_conn new-routing-mark=to_wan2 passthrough=no add action=mark-connection chain=prerouting comment="load banance 5.0" connection-state=new dst-address-type=!local \ new-connection-mark=wan1_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/0 src-address=192.168.5.0/24 add action=mark-connection chain=prerouting comment="load banance 10.0" connection-state=new disabled=yes dst-address-type=!local \ new-connection-mark=wan1_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/0 src-address=192.168.10.0/24 add action=mark-connection chain=prerouting comment="load banance 5.0" connection-state=new dst-address-type=!local \ new-connection-mark=wan2_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/1 src-address=192.168.5.0/24 add action=mark-connection chain=prerouting comment="load banance 10.0" connection-state=new disabled=yes dst-address-type=!local \ new-connection-mark=wan2_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/1 src-address=192.168.10.0/24 add action=mark-routing chain=prerouting comment="load banance 5.0" connection-mark=wan1_conn connection-state=new new-routing-mark=\ to_wan1 passthrough=yes src-address=192.168.5.0/24 add action=mark-routing chain=prerouting comment="load banance 10.0" connection-mark=wan1_conn connection-state=new disabled=yes \ new-routing-mark=to_wan1 passthrough=yes src-address=192.168.10.0/24 add action=mark-routing chain=prerouting comment="load banance 5.0" connection-mark=wan2_conn connection-state=new new-routing-mark=\ to_wan2 passthrough=yes src-address=192.168.5.0/24 add action=mark-routing chain=prerouting comment="load banance 10.0" connection-mark=wan2_conn connection-state=new disabled=yes \ new-routing-mark=to_wan2 passthrough=yes src-address=192.168.10.0/24 /routing table add disabled=no fib name=to_wan1 add disabled=no fib name=to_wan2 /ip dhcp-client add comment=WAN1 interface=ether1 script="{\r\ \n :local rmark \"to_wan1\"\r\ \n :local count [/ip route print count-only where comment=\"to_wan1\"]\r\ \n :if (\$bound=1) do={\r\ \n :if (\$count = 0) do={\r\ \n /ip route add distance=1 gateway=\$\"gateway-address\" check-gateway=ping routing-mark=to_wan1 comment=\"to_wan1\ \"\r\ \n /ip route add distance=1 gateway=\$\"gateway-address\" check-gateway=ping comment=\"to_wan1\"\r\ \n } else={\r\ \n :if (\$count = 1) do={\r\ \n :local test [/ip route find where comment=\"to_wan1\"]\r\ \n :if ([/ip route get \$test gateway] != \$\"gateway-address\") do={\r\ \n /ip route set \$test gateway=\$\"gateway-address\"\r\ \n }\r\ \n } else={\r\ \n :error \"Multiple routes found\"\r\ \n }\r\ \n }\r\ \n } else={\r\ \n /ip route remove [find comment=\"to_wan1\"]\r\ \n }\r\ \n }\r\ \n\r\ \n" use-peer-dns=no use-peer-ntp=no # Interface not active add comment="for backup from rsd mobile" default-route-distance=5 interface=wlan1 use-peer-ntp=no add comment=WAN2 interface=ether2 script="{\r\ \n :local rmark \"to_wan2\"\r\ \n :local count [/ip route print count-only where comment=\"to_wan2\"]\r\ \n :if (\$bound=1) do={\r\ \n :if (\$count = 0) do={\r\ \n /ip route add distance=1 gateway=\$\"gateway-address\" check-gateway=ping routing-mark=to_wan2 comment=\"to_wan2\ \"\r\ \n /ip route add distance=1 gateway=\$\"gateway-address\" check-gateway=ping comment=\"to_wan2\"\r\ \n } else={\r\ \n :if (\$count = 1) do={\r\ \n :local test [/ip route find where comment=\"to_wan2\"]\r\ \n :if ([/ip route get \$test gateway] != \$\"gateway-address\") do={\r\ \n /ip route set \$test gateway=\$\"gateway-address\"\r\ \n }\r\ \n } else={\r\ \n :error \"Multiple routes found\"\r\ \n }\r\ \n }\r\ \n } else={\r\ \n /ip route remove [find comment=\"to_wan2\"]\r\ \n }\r\ \n }\r\ \n\r\ \n" use-peer-dns=no use-peer-ntp=no По някаква причина повечето трафик ми минава през ether2 който трябва да ми е бекъп, как да коригирам нещата за да си минава повечето през ether1 където е основната връзка. Даже като следя връзките понякога ми бърка маркировката че е през wan1_con a трафика си минава през wan2 което е ether 2 бекъпа ми. Добавих и dhcp клиент конфизите, 2-та доставчика са с динамично раздавани публични адреси.   Другото питане, как мога определен хост от мрежата да го накарам да минава единствено през единия доставчик?   От тази тема съм се ориентирал за конфига без нещата за капс ман: PCC

Да проблема ми беше в NAT-a